PBN-16
* tandem-axle trailer, 90x2100, leaf springs (ADR Italy)
* 6,5x70 R18 tires (load index 3.98 t, 30 km / h)
* pneumatic braking system (hydraulic or mixed)
* length x width x height (mm): 7100x2550x3380
* capacity 16 m³, load capacity 11.3 t, loading height 2.9 m
* grain conveyor Ø 400 mm, productivity 3 t / min, unloading height 4.3 m
* reduction drive S2100 (Bondioli & Pavesi, Italy)
* hydraulic support leg
* replaceable towing eye Ø 90 mm
* three holes for cleaning the horizontal auger
PBN-20
* single-axle 150x2300 trailer with leaf springs (ADR Italy)
* 650x65 R30.5 tires (load 9.08 t, 30 km / h)
* pneumatic braking system (hydraulic or mixed)
* length x width x height (mm): 7500x3000x3850
* capacity 20 m3, load capacity 15 tons, loading height 3.4 m
* auger Ø 400/500 mm, productivity 3/6 t / min, unloading height 4.3 m
* reduction drive S2100 (produced by the Italian company Bondioli & Pavesi)
* hydraulic support leg
* unloading auger
* replaceable towing eye Ø 90 mm
* three holes for cleaning the horizontal auger
* ladder
PBN-30
* tandem-axle 110x2300 trailer with leaf springs (ADR Italy)
* 560x60 R22.5 tires (load 7.2 t, 30 km / h)
* pneumatic braking system (hydraulic or mixed)
* length x width x height (mm): 8500x2960x3800
* capacity 30 m3, load capacity 20 t, loading height 3,45 m
* auger Ø 500 mm, productivity 6 t / min, unloading height 4.3 m
* reduction drive S2100 (produced by the Italian company Bondioli & Pavesi)
* hydraulic support leg
* unloading auger
* replaceable towing eye Ø 90 mm
* three holes for cleaning the horizontal auger
* ladder
* the screw is made out of one steel sheet
PBN-40
* thriple-axle 130x2500 trailer with leaf springs (FAD, ADR Italy); Front and rear axles turn; The rear axle is hydraulically fixed when reversing
* 560x60 R22.5 tires (650/55 R26.5) (load 7.2 t, 30 km / h, BKT India)
* pneumatic brakes on two axles (hydraulic or mixed)
* length x width x height (mm): 10490x3000x3720
* capacity 40 m3, load capacity 30 t, loading height 3,45 m
* auger Ø 500 mm, productivity 6 t / min, unloading height 4.3 m
* reduction drive S2100 (produced by the Italian company Bondioli & Pavesi)
* hydraulic support leg
* unloading auger
* removable towing eye Ø 50 mm
* three holes for cleaning the horizontal auger
* ladder
* the screw is made out of one steel sheet (thickness 10/5 mm, Tecnofer, Italy)
PBN-50
* quad-axle
* 560x60 R22.5 tires (650/55 R26.5) (load 7.2 t, 30 km / h, BKT India)
* length x width x height (mm): 11520x2995x3980
* capacity 50 m3, load capacity 38 t, loading height of 3.71 m
* hopper Ø 520 mm, productivity 6/12 t / min
* hydraulic support leg
* unloading auger
* ladder
Specs for grain reloading trailers
Model | PBN-16 | PBN-20 | PBN-30 | PBN-40 | PBN-50 |
---|---|---|---|---|---|
Axles | tandem axles | single axle | tandem axle | quad-axle (ADR) | quad-axle (ADR) |
Maximum operating weight, kg | 16000 | 20000 | 27000 | 39000 | 50000 |
Unladen weight, kg | 4750 | 4950 | 6500 | 9250 | 12000 |
Load bearing capacity, kg | 11250 | 15050 | 20500 | 29750 | 38000 |
Hitch capacity, kg | 2000 | 2000 | 2000 | 3000 | 3000 |
Trailer length, mm | 7100 | 7500 | 8500 | 10490 | 11520 |
Trailer height, mm | 3380 | 3850 | 3800 | 3720 | 3980 |
Loading height, mm | 2900 | 3400 | 3 450 (3 500) | 3450 | 3710 |
Trailer width, mm | 2550 | 3000 | 2960 | 3000 | 2995 |
Towing hitch height, mm | 500 | 500 | 500 | ||
Volume, m 3 | 16 | 20 | 30 | 40 | 50 |
Auger diameter, mm | 400 | 400/500 | 500 | 500 | 520 |
Discharge height, mm | 4300 | 4300 | 4300 | 3400 | |
Unloading capacity, t/min | 3 | 43254 | 6 | 6 | 6 (540 p/min), |
12 (1000 p/min) | |||||
Moving the conveyor into the work position | hydraulic | hydraulic | hydraulic | hydraulic | hydraulic |
Drawbar support leg | hydraulic | hydraulic | hydraulic | hydraulic | hydraulic |
Drawbar eye diameter, mm | 90 | 90 | 90 | 50 | |
Power necessity, hp | 120 | 120-150 | 200 | 300 | 300-350 |
Tires | 16,5/70-18 | 750/70 R26 | 560/60 R22,5 | 560/60 R22,5 | 560/60 R22,5 |
(650/55 R26,5) | (650/55 R26,5) | (650/55 R26,5) | |||
Maximum speed, km/h | 30 | 30 | 30 | 30 | |
Breaking system | hydraulic | hydraulic | hydraulic | hydraulic, on two axles |
Additional equipment
Model | PBN-16 | PBN-20 | PBN-30 | PBN-40 | PBN-50 |
---|---|---|---|---|---|
Cover | + | + | + | + mechanical | + |
Extra auger to load a seed drill SHRP-5 | + | + 6 t/min, | + | + | + |
Discharge 4,3 m | |||||
Cardan shaft | + | + | + | + | + |
PVC-edge for the hopper screw, length 1,2 m | + Ø 300 mm | + Ø 300/400 | + Ø 400 mm | + Ø 400 mm | + |
Hydraulic auger outlet positioner | + | + | + | + | + |
Weighing system with a printer (Dinamica Generale, Italy) | + | + | + | + | + |
Exchangeable towing eye Ø 40 mm või Ø 50 mm | + | + | + | ||
Tow ball, Ø 80 mm | + | + | + | + | |
Auger outlet extension | + | + | + | + |
UNLOADING RECEIVING HOPPER BNP-12 (BNP-12/E), Kovcheg
The length of the unloading receiving hopper is 7 meters, accommodating 12 m3 of grain. Hydraulic folding side (model BNP-12/E) and in the case of KAMAZ 55102, side unloading is without losses. In the transport mode, the trailer rests on the wheels, in the loading position on the ground. On the bottom of the trailer there are three augers, out of which two are Ø 300 mm; unloading auger is Ø 400 mm, rolled, with a productivity of 3 t/min. The discharging height of the trailer is 4.3meters. The towing hitch is replaceable, Ø 90 mm. The model BNP-12/E can be started with the tractor’s hydraulics (the trailer is equipped with 4 electric motors, 380 V). 7,5 kW motor starts the hydraulic processes like moving the side panel or auger, 4 kW and 5,5 kW motors start the horizontal augers and 18 kW engine the vertical augers.
Specs for BNP-12
Model | BNP-12 | BNP-12/E |
---|---|---|
Bunker length, mm | 7 000 | 7 000 |
Bunker width, mm | 2 500 | 2 500 |
Bunker height, mm | 920 | 920 |
Bunker volume, m 3 | 12 | 12 |
Trailer length, mm | 8 000 | 11 000 |
Trailer width, mm | 2 500 | 2 500 |
Trailer height, mm | 5 000 | 5 000 |
Discharging height, mm | 4 300 (5 500) | 4 300 (5 500) |
Productivity, t/h | 180 | 180 |
Tires (4) | 10/75-15,3 | 10/75-15,3 |
Drawbar eye Ø, mm | 90 (40/50) | 90 (40/50) |
Power necessity, hp | 82-120 | - |
Electricity | - | 380 V |
Electric motors (4) | - | 7,5 kW + 4 kW + 5,5 kW + 18 kW |